The JBL Clip 3 Charging Indicator Is Not Much of a Battery Charge Remaining Meter JBL Clip 3 portable wireless Bluetooth speaker turned OFF. Even with the AC charger still connected, the lamp does not glow when battery is full, unless the speaker itself is turned on. The battery recharge cycle finishes when the speaker status lamp turns off, as shown next. The speaker top view, showing the status lamp glowing red. This next picture shows the speaker during charge cycle. It turn off when the speaker is not ON, and turns white when it is ON. When the Light Goes Out While Charging, Then Charging is DoneĪs speaker charging continues, the light keeps glowing red, Battery charging is done when The lamp goes out, or turns white. Also note that this light never flashes red while charging is happening. When you apply adequate USB power, this red flashing light turns to a solid red. It only flashes red like this when the battery is nearly dead and AC power has not yet been connected. Note that this lamp blinks red when the battery is critically low and should be recharged immediately. But it does not display how far along the charging is. On this speaker, the glowing light is the only visual indication that charging is going on. The status lamp lights up red (no flashing) while the speaker charges, as shown in the next picture. JBL Clip 3 Charging Indicator Shows Battery Recharging Progress The lamp is also dark when the charger IS connected but the battery finished charging to full. When you power down the Clip 3 with no charger connected, this lamp, that also doubles as a pilot light, is dark, as shown next. How to Read the JBL Clip 3 Battery Indicator Lights 1. In this piece, we describe how to read the JBL Clip 3 battery status and charging indicator lamp on this speaker. Nor does it show how much “juice” the battery has left when discharging, although as mentioned, it does change color when the battery reaches near-dead state. However, it does not tell you the charging progress, or how full the battery is at a given time while charging. This displays battery status, whether it’s draining or charging, or whether it’s critically low or not when discharging. The Clip 3 JBL Bluetooth speaker has a single LED on its top panel, under the carabiner clip, as shown in the following pictures.
0 Comments
Leave a Reply. |